How to Install Ghost Immobiliser

The Ghost immobiliser is an innovative new product that protects your vehicle from key-cloning ECU swapping and hacking. It connects to the vehicle’s CAN data network, and is hidden in the buttons that are already on your dashboard and the steering wheel. It works silently without LED indication or radio signals.

It’s also unnoticeable by thieves using the latest methods, like the RF scanning and code theft technology. It’s a small cost to pay for the protection of your pride.

Easy to install

Ghost immobilisers go one step further than standard vehicle immobilisers. They block thieves from starting the car without the correct key or fob. It comes with systems that stop key blocking, signal jamming and device spoofing – techniques that are used frequently to steal cars with standard immobilisers. It also allows you to set a pin code that is difficult for thieves to penetrate.

The system is plugged into your vehicle’s onboard CAN (Controller Area Network) data network, and programmed to safeguard it by a unique PIN code that you can choose. The CAN Immobiliser will then block the engine, even if keys are in ignition, and will not start again until the correct code is entered. The system is completely undetectable. There are no indicators in the form of LEDs or sound signals to warn you of its presence. It doesn’t transmit radio frequencies so it is impossible to use codes or scanners.

The Ghost CAN Immobiliser is deactivated by using the companion app on your smartphone. This makes it easy to transfer your car to a new one in the event that you decide to sell or trade in your old one. It is also TASSA-approved and will reduce your insurance premiums. This is a crucial factor to consider when selecting a security system for your vehicle.

In contrast to the physical anti-theft equipment such as steering wheel locks or wheel clamps the ghost immobiliser is concealed and incorporated in the bodywork of the vehicle making it difficult to remove. A ghost immobiliser is also far more difficult to disable or hack than traditional tamper-proof security devices such as alarms and beacons.

The ghost immobiliser can be used with a wide range of vehicles and comes with a variety of additional features. It comes with an emergency-entry system that lets you enter the passcode on your smartphone to disable the immobiliser. This allows you to drive to your home. It also has the valet mode, which lets you give your vehicle to mechanics or a valet service without disarming it. It can also be paired with an GPS tracker to help you find your vehicle after it’s been stolen.

Easy to deactivate

In a world of vehicle theft, it’s crucial to figure out ways to safeguard your pride. Ghost immobilisers are one of the most effective methods to prevent thieves from stealing your car. The system works by connecting to the CAN network of your vehicle and programming a specific PIN sequence that must be entered to allow the engine to start. This is done by pressing buttons on the steering, center console or doors. A custom sequence of up 20 inputs is used that is very difficult to get.

The ghost immobiliser differs from traditional security systems that use keys or LED indicators. It makes use of the CAN (Controller Area Network) system in your Mercedes in order to connect to the ECU via the data bus to make it inoperable. No parts are removed or wires are cut. This means that the device will not be identified by modern diagnostics, and it is not able to interfere with any radio frequencies that a thief might try to find your car.

A ghost immobiliser also stops key cloning, and ECU swapping. This is a method commonly used by thieves to steal vehicles, however the ghost immobiliser can stop the thieves from doing this by requiring the correct PIN code in order for the engine to start. The ghost immobiliser can stop thieves from adding new keys, or even replacing the ECU. It’s designed to work with existing Mercedes keys.

This technology can be combined with other security measures, like GPS trackers. This technology can help you find your car in the event of theft, but does not prevent thieves from taking it away in the first place. In contrast, a ghost immobiliser can be a better solution for owners of expensive cars.

A ghost immobiliser can also safeguard your vehicle’s resale price since it stops thieves from selling your vehicle on the blackmarket. This is especially crucial for high-end cars, as they can often lose their resale value after they’ve been stolen in the past. Ghost immobilisers do not leave any evidence of its installation, therefore it won’t affect the aesthetics or How to Install ghost Immobiliser damage the engine in the event that it is accidentally removed.

Transferring to a new car is easy

Ghost is among the most versatile and adaptable security devices available. The bmw x5 ghost installer communicates with your ECU through the CAN data network and is completely silent. This means it can’t be monitored or detected for a telltale frequency which is an important characteristic for people who wish to safeguard their cars against theft.

The Autowatch Ghost is a revolutionary immobiliser that fights modern-day vehicle theft. It stops key cloning, hacking and other methods employed by professional thieves to steal vehicles. The system is activated within a period of 3 or 30 seconds (depending on the vehicle) after the ignition has been switched off. It is active until the owner enters the PIN (4-20 button clicks, depending on the model). If you have the optional gear-box lock option, it will also prevent the vehicle from moving while the engine is running.

This is the very first security product designed to stop the latest methods of keyless car theft. GHOST uses CAN data network to connect to the ECU of your car unlike other immobilisers that use radio frequency. It is also completely silent. This makes it inaccessible to thieves, who are listening for the distinctive LED indicators or frequencies that may reveal other immobilisers’ systems.

It also cannot be detected by sophisticated RF scanning or code-grabbing technology that could determine what kind of security system is installed in your vehicle. It is also difficult to dearm because it does not require keyfobs or radio frequencies. The ghost 2 immobiliser installation is also compatible with several different vehicles and includes an emergency backup code to make it even more secure.

The GHOST can be used in conjunction with a tracker to stop the vehicle from being moved if it is stolen. This is a great tool for those who are interested in customising their cars or buying expensive or scarce ones. In reality, it is becoming more and more common for insurance companies to demand an immobiliser that is ghost-proof on all vehicles with keyless entry. This can result in lower monthly cost of insurance.

Easy to change the PIN code

The Ghost immobiliser made by Autowatch is a groundbreaking new device that guards your car against key cloning and hacking. It is connected to your car’s CAN data network. It allows the creation of an unique, user-defined and unique disarm sequence that has to be entered before your car can be driven again. This is similar to how PIN codes work for credit cards. You can change the pin at any time.

The discreet installation of the ghost system leaves no visible marks on your car. This makes it harder for thieves and vandals to detect and tamper. It is also able to be transferred to a different vehicle without any issues. This is a huge advantage for anyone looking to sell their vehicle in the future.

You can alter the PIN code for a ghost immobiliser in only a few steps. This process is not complicated and should take just about a couple of minutes. But, you must make sure that the vehicle is warm and that the battery is fully charged prior to beginning this process. This method will disable the service mode. You must enter the PIN prior to being able to return to the vehicle.

After you’ve changed your PIN code, it is important to test it in a safe environment. This is a crucial step to ensure that the device is functioning correctly. To do this you must turn on the ignition and press a few buttons on the steering wheel, doors or centre console. The ghost will illuminate the sequence of LEDs to indicate the correct sequence of disarming. You can test the system by entering service mode which will stop the engine from starting.

Ghost immobilisers are the ideal choice for vehicles that are usually not monitored. It is designed to work with most types of vehicles, including motorhomes, vans, and ride-on lawnmowers. It also offers a variety of other features, such as mechanical protection and anti-hijacking equipment. This technology is an excellent addition to the security of your vehicle and reduce your insurance costs. Many insurance companies require this device to be fitted on vehicles that have keyless entry to help reduce the rising risk of theft.