Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not get rusty or decay.

It is crucial to wash and oil UPVC windows and doors regularly. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they typically fit into frames that were previously in use very easily. However If you have double glazed window repairs pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation, you will need to find some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

If you’re planning attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards will fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

It’s a good idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. As time passes, they may be affected by a variety of issues, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your upvc window repair near me window is beginning to sag it’s crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could help fix a window that is sagging. First, you’ll need to open the windows to get at the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you’ve repositioned the hinges, close your window and test it for fitting. If you’re satisfied with the fit, tighten the screws to ensure that they remain in position.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it’s important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and draught-proof.

UPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could be due to the mechanism of the handle getting worn out. Luckily, it’s not difficult to fix a loose uPVC window handle yourself. You’ll first need to close the window and then perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn’t you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and wet floors. The leaks of water from windows do can not only cause degradation of your home’s structure but also hinder your efforts to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer is applied. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to ‘over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens in an ease. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is very easy to change a window hinge however it is easier if someone else helps you hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation in the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to offer assistance.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be disaligned as a result of wear, creating gaps between the frame and sash. These can be easily fixed by giving them a good cleaning, but when they’re beyond repair, it may be necessary to have them aligned or upvc Window Repairs replaced. In addition, Upvc window repairs the interlock could be misaligned. It is located on the hinge side and might require to be cleaned. In some cases it is possible to replace them.

The second most frequent cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen the risk of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and there may come a point where it is more economical to replace them than fix them. If you have any problems with your Upvc window it is recommended to speak with a professional immediately.