How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add the second key. This requires a handheld computer, called Tech-2 which is used by the dealer. Then the transponder must be replaced and a key are required to be purchased.
Rotate your keys to stop one from wearing out faster than another. This will also ensure that your keys remain in pristine condition.
Replacement Case
The new key fobs for keys are not like the old Saab keys. They feature electronic components that make it difficult to copy. This has made car theft significantly more difficult than 20 years ago. It has also made it more expensive to replace lost keys.
Saab 9-3 owners must have two keys working. If one is lost, it costs a fortune to replace it in the vehicle because it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 for saab centre milton keynes this.
There are some ways around these expensive. Some parts providers will use the code of an extra key to cut a new metal blade for less than that of a dealer. The key must be exactly the same as the original in order for it to work in your vehicle.
You can also change the case yourself by following these steps. You’ll need an open-faced screwdriver and a lot of patience. With the screwdriver, pry apart the plastic and remove the emergency key. Once the case is open, remove the electronics and put them in your new case. Make sure you insert the correct key and badge into the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This video tutorial on DIY from YouTube Cyclone Cyd will show you how to replace the battery in the remote key fob in just four steps. This tutorial should work for any modern saab key fob, however the procedure might differ slightly.
The button is typically located near the saab centre milton Keynes logo on the back of the fob. It is usually located next to the Saab logo on the back of the fob. Next take an screwdriver with a flat head to insert into the tiny hole in this button. This should be sufficient to open the fob case in order to change the battery.
After the new battery CR1632 is in place You can then reassemble the remote key fob. You can then program it to your car. The entire process should take no more than an hour, if not less. This is a straightforward procedure that doesn’t require special tools.
If you lose a key, the process will be a bit more involved however, it can be done. The dealer must find the VIN number of the car and then order a replacement key blade and TWICE module that has the exact unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob contains batteries that are used to lock and unlock your vehicle. Batteries are able to last for a short time and will eventually die. It’s a common issue in all vehicles. The good news is you can replace the battery in all key fobs, and not have to replace the entire case. You can purchase fobs replacements on Amazon that come with all the electronic components already in place, so you’ll simply open the case and replace the batteries in the original case. It is important to remember that you will need to remove the emergency key first, and you can accomplish this by inserting the small screwdriver flathead into the slot found in the middle of the case. The screwdriver should be moved around the case, and Saab Centre milton keynes it should split open, making it easier to remove.
When you’re ready to replace the keys, make sure you have a spare as this will reduce the total cost by a substantial amount. If you have an extra key, ask the dealer to cut it and program it to your car. This is much cheaper than purchasing a new fob.
It is possible to add another key to your car if you don’t already have one, however it requires lots of research and effort. It costs around a hundred dollars to purchase an additional car key. The computer in the vehicle also has to be programmed. This can be accomplished by a professional, however it’s an expensive option for the majority of owners.
Replacement Ignition
In contrast to the earlier Saab vehicles, the latest SAAB 9-3 models feature an upgraded alarm system that is built around a coded key. This means that in the event that you lose your only functioning key, getting another key can be extremely expensive because the car needs to have a unique computer module installed and it must also be designed to accept a different key. Dealers can charge hundreds of dollars to program an entirely new key, even if they’re unable to do it.
Dealers will charge you a premium to replace your car’s computer (also known as the CIM or saab key twice) when you lose the only working key. We can reprogramme the existing EEPROM of your car’s computer to make it ready for an additional key. This will save you more than 50% on the cost you have to pay an auto dealer.
If you’ve been a long time owner of a 03-11 SAAB 9-3, then you probably know that the ignition key isn’t really all that durable. If the ignition key you have isn’t working correctly, you should consider replacing it. They can become very sticky and the buttons have been known to fall off. Fortunately, replacing the ignition key isn’t as difficult as it sounds, and it can be done quickly with the right tools.