Fiat 500 replacement key for fiat 500 Key Fob
It may be time to change the battery if your 500 remote key fob isn’t working. If you replace the battery but it still doesn’t work, the problem may be elsewhere.
At United Locksmith, we specialize in the creation of new keys for old automobiles. We have the tools and components needed for this service.
Dead Coin Battery
A dead battery is the most common cause of your Fiat 500 keyfob not locking or unlocking the doors. The battery for the coin cell in the key fob will drain quickly in the event that you don’t use frequently enough. If your remote started to show signs of weakness such as a loss of range and stopped working completely it is likely that the battery is dead.
The battery in the key fob is held in place by metal clips for retaining. If the clips aren’t secure, they could cause problems with the contact, which can stop your remote from receiving power. Use a flathead screwdriver break open the retaining clip and then remove the old battery. Make sure you use a replacement battery with the same type of voltage, dimensions and specifications as the original battery.
The key fob might also become corroded or damaged by water exposure. Even a quick bath in soapy, warm water can damage the chip. Keep your key fob dry.
Water Damage
Water damage may be the cause of your key fob not functioning properly. The rubber seals on key fobs stop them from getting damaged by a slight splash or drizzle of water. However, it is crucial to keep your keys from the washing machine, ocean, and pool.
The key fob comes with an electronic chip inside it that sends a signal to your car’s immobilizer system. The chip allows the 500 to lock and start. If it gets wet, however it will not function.
Try cleaning the internal electronics of your key fob with isopropyl Alcohol or an electronic cleaner to determine whether they’re still in good condition. It is recommended to replace the key fob if it has been submerged into salt water instead of trying to fix it yourself.
A replacement fob may cost you a little bit but it’s far cheaper than having to have your Fiat 500 towed to a dealer and fixed there! Plus, you can do it yourself with a few easy steps. Be sure to have the correct battery type before attempting to open your keyfob. There are step-by-step directions for every car keyfob online.
Faulty Chip
The chip located within the key fob communicates with the car’s immobiliser system to ensure the vehicle is only capable of starting when the correct key is inserted. If the chip is damaged or corrupted in any way, your car will not start.
A chip that is defective can happen due to several reasons, but the most common reason is water damage or the battery being dead. Whatever the reason, it’s recommended to delegate this task to a locksmith who will be able to replace the chip quickly and at an affordable price.
If your key fob stops working after exposure to clean tap water or rain, unplug the battery and clean the electronic component using a paper towel to ensure it is fully dry before putting it back in. If the key fob will not function, there’s the possibility that it has an issue with the component and requires to be replaced.
A few people will visit their dealer if they need an entirely new Fiat fob. However, this could be an expensive option. If you are seeking a cost-effective solution to have your Fiat key fob repaired then look no further than United Locksmith. We have the tools and knowledge required to fix your Fiat 500 replacement key uk fob in a timely and professional way.
Faulty Receiver Module
Fiat key fobs transmit a signal up 50 feet to the vehicle, which will unlock and lock the doors (and start the vehicle if it has automatic transmissions). However, there are some things that can cause the fob to cease functioning. This could be due to a dead coin battery damaged by water buttons, HOME worn ones as well as a receiver module problem or signal interference, or a malfunctioning electronic chip.
If the fob has been placed in a pocket that endured extreme trauma, such as being dropped on hard floor or being washed in the washing machine the fob may not be capable of communicating with the car’s Body Control Module (BCM). This is because the BCM is a secure system that can only accept signals from a genuine original key and not another.
If this is the case, then you will require replacing your fob. A professional locksmith is able to handle every aspect of the replacement procedure and can even program a brand new one for the 500. In fact, they can even offer you a clone key that functions the same as your original fob (and costs a fraction of the price).
